Ways to Install a Car Seat:
Properly installing a car seat is one of the important things to do. If you cannot successfully do this, your child may be put in danger. As much as possible, you have to make sure that you follow the right instructions to ensure your child’s safety because most of the time, this is often overlooked. Whenever you travel with your child, you are sure that he or she is safe. It is very important to install the car seat correctly and properly in your car. It is the best protection you can give to your child when a crash happens. Research shows that 7 out of 10 car seats are not installed correctly. There are two methods on how to install a car seat. These are the rear facing car seat and the front facing car seat.
Choosing a safe car seat for your baby:
There are things to remember in order to get a safe car seat for your beloved baby.
- Some car seats have an expiry date. It is already unsafe to use a car seat that has already expired.
- You should also not use a seat that has been in a car crash before.
- You need to read the instruction book for your chosen car seat.
Read the manual and the law:
Before anything else, you have to read first the manual for your car, as well as your car seat manual. You need to check if there are special instructions, which you can work on in installing the car seat. You also have to take a look at the labels on the car seats, such as the height and weight limits.
Actually, there are the car seat laws. This varies depending on the province you are living in. The importance of reading the law is that, you will have the idea of the minimum safety standard in your place. This will greatly benefit your child while you ride your car.
Lastly, for your information, not all car seats fit any car. Because of this, you also have to choose carefully the car seat that you are going to use. Make sure that it is not only safe for your child, but also suits the car that you own.
Installing a Rear facing car seat:
First, the car seat must be placed in the backseat, and it should face towards the rear window. It is always much safer to use the backseat for children, especially for cars that have built-in airbags. If you really think that you need to put your child in the passenger seat, then you have to turn off the passenger airbag for safety purposes.
The next thing you need to do is attach the seatbelt to the base of the car seat. For tightening instructions of the seatbelt, you can read the owner’s manual. There are some car seats that use lower latch anchors in attaching the car seat. It is better that you consult the manual for instructions on using the anchors. Beware of lower anchors. They must not be used together with seat belts.
You also have to make sure that the car seat is installed at the correct recline angle. Do not tilt the car seat more than 45 degrees back. Just see to it that your child’s head will not tend forward. This will ensure that your child is comfortable while traveling. As a guide, you can use some indicator on the car seat. If it is necessary to place a rolled towel under the base, then you can do so as long as the manual says it is fine to do it.
The shoulder straps must be placed in the lowest possible position. This ensures that the child is tightly situated on the car seat. You can use the slots below the child’s shoulder. Moreover, the chest clip must be at armpit level. Of course, you also have to make sure that there is still a room for movement for the child, even though he or she is tightly placed on the seat.
Installing a rear facing car seat is required for babies up to 12 months old. It is recommended until he or she reaches the recommended height and weight.
Installing a Front facing car seat:
You should not forget to read the manual. There are different harness slots for each car seat, and you need to determine this information of the car seat that you are using. Again, you need to place the car seat in the backseat. The back part of the car seat should be straight up against the cushion, and its base should be flat on the car seat. If there are head restraints, you can remove them if needed.
Then, you need to attach the tethers of the car seat to the tether anchor of your car. If your car does not have tethers, you can call your car’s manufacturer if they can add tether to it because it can definitely increase the safety of your child in your car. In order to make sure that your child is really safe in the backseat, you need to ensure a snug harness. Make sure that the harness lies flat, and not twisted to ensure that your child does not feel irritated with it. To ensure proper installation, you can have it double-checked by a child passenger safety technician.
Another important thing that you have to keep in mind when you travel with your child is to clothe him with tight clothes. This will help him or her to not feel irritated with the strap around him or her. Moreover, do not use heavy clothes on him because it may not be possible to tighten the straps securely.
There are times when the child outgrows the infant car seat. If this happens, you can switch to a convertible car seat, and have it in a rear facing position. These types of seats have height and weight limits that allow your child to have a rear-facing position much longer. It is recommended that you change your car seat to a higher rear-facing size limit if your one-year old baby grows too tall or heavy.